# What is Make.com? Guide to automation using scenarios for beginners

URL: https://opcaios.org/en/blog/make-la-gi
Date: 2026-10-25
Author: Lê Quốc Nghĩa

# Make.com là gì? Tự động hoá không cần code cho doanh nghiệp nhỏ

Make (make.com) là nền tảng tự động hoá trực quan trên đám mây: bạn kéo thả và nối các mô-đun thành một sơ đồ gọi là scenario, và Make tự chạy sơ đồ đó để chuyển dữ liệu giữa các ứng dụng. Điểm nổi bật của Make so với nhiều công cụ cùng loại là khả năng rẽ nhánh dữ liệu bằng router và bộ lọc ngay trên một bảng vẽ, nên hợp với quy trình nhiều bước, nhiều điều kiện. Theo thư viện Tiện ích của OPCAIOS, gói Free của Make có 1.000 credit mỗi tháng và gói Core bắt đầu khoảng $9 mỗi tháng; giá này chưa được đối chiếu lại ngày 22/10/2026. Chẳng hạn (giả định), một form liên hệ có thể đẩy khách vào bảng tính rồi báo cho nhóm bán hàng. Bài này giải thích Make bằng ngôn ngữ đời thường qua bốn phần: (1) khái niệm scenario, mô-đun, router; (2) cách tính credit; (3) cách tạo scenario đầu tiên; (4) các lỗi hay gặp.

![Một scenario Make: webhook nhận dữ liệu, router chia ba nhánh, mỗi mô-đun chạy tốn một credit](https://opcaios.org/images/blog/make-la-gi/so-do.webp)
*Một scenario có rẽ nhánh: dữ liệu vào, router chia theo điều kiện, mỗi mô-đun chạy dùng credit. Sơ đồ: OPCAIOS.*

## Make.com là gì?

Make là nền tảng tự động hoá không cần code, nơi tôi xây quy trình bằng cách nối các mô-đun trên một bảng vẽ. Theo tài liệu chính thức của Make (kiểm tra ngày 22/10/2026), scenario là một chuỗi mô-đun mô tả dữ liệu được chuyển và biến đổi thế nào giữa các ứng dụng và dịch vụ. Ví dụ điển hình trong chính hướng dẫn của Make: nhóm marketing thêm khách tiềm năng vào bảng tính, và scenario tự báo cho nhóm bán hàng qua Slack.

Make trước đây có tên Integromat (theo Make). Theo thông tin trong thư viện Tiện ích của OPCAIOS, trang chủ Make giới thiệu hơn 3.000 ứng dụng dựng sẵn. Ngoài scenario, tài liệu của Make còn nhắc tới các thành phần mới: Make AI Agents (tác nhân AI), Maia (trợ lý dựng automation qua hội thoại), máy chủ MCP để nối trợ lý AI với các thao tác của Make, và Make Grid.

## Scenario, mô-đun, router và filter là gì?

Bốn khái niệm cơ bản của Make:

| Khái niệm | Ý nghĩa | Ví dụ |
|---|---|---|
| **Scenario** | Toàn bộ quy trình, một sơ đồ | "Form liên hệ → Sheets → báo tin" |
| **Module (mô-đun)** | Một bước, một hành động của một ứng dụng | Thêm dòng vào Google Sheets |
| **Router** | Chia luồng thành nhiều nhánh | Khách hỏi báo giá đi nhánh A, hỏi bảo hành đi nhánh B |
| **Filter (bộ lọc)** | Điều kiện để dữ liệu đi tiếp | Chỉ cho đi tiếp nếu có số điện thoại |

Dữ liệu từ mô-đun trước được "ánh xạ" (mapping) sang mô-đun sau: tôi chọn trường "tên khách" của bước đầu rồi thả vào ô "tên" của bước sau. Make cũng cho thêm nhánh dự phòng (fallback route) cho dữ liệu không khớp điều kiện nào, để không bị mất khách vì sót trường hợp.

## Credit trong Make là gì và tính thế nào?

Credit là đơn vị tính phí của Make: tôi mua credit theo gói và mỗi lần một mô-đun thực hiện thao tác thì tiêu credit. Theo tài liệu chính thức của Make (kiểm tra ngày 22/10/2026), "credit" đã thay cho thuật ngữ "operation" trước đây, còn gói và giá giữ nguyên. Với các ứng dụng không dùng AI, một thao tác (operation) bằng một credit, bất kể dung lượng dữ liệu. Ví dụ mô-đun tải tệp lên Google Drive luôn dùng một credit cho mỗi tệp, dù tệp nhỏ hay lớn. Một số tính năng AI và nâng cao tính theo mức dùng thực tế (số token, kích thước tệp, số trang hoặc thời gian xử lý).

Về AI, tài liệu của Make phân biệt hai cách. Nếu tôi dùng mô-đun của OpenAI hay Anthropic [Claude](/tien-ich/claude) với tài khoản riêng, tôi trả Make credit theo số thao tác và trả nhà cung cấp AI tiền token. Nếu dùng "AI Provider" tích hợp sẵn của Make thì credit tính theo cả token lẫn thao tác.

Ví dụ tính (số giả định): scenario có 4 mô-đun, chạy cho 500 khách hàng mỗi tháng, dùng khoảng 4 × 500 = 2.000 credit. Với router, mỗi nhánh chỉ chạy khi điều kiện của nhánh đó đúng. Vì vậy hãy đếm số mô-đun thực sự chạy, không phải tổng mô-đun trên sơ đồ.

## Does Make have a free plan?

Make has a free plan to get started. According to OPCAIOS's Utility Library (compiled from Make's official pricing page), the Free plan includes 1,000 credits per month, a maximum of 2 active scenarios, and a minimum run interval of 15 minutes; paid plans start with Core at around $9 per month for 10,000 credits. Make's pricing page currently requires a bot verification step, so OPCAIOS hasn't rechecked the price as of 22/10/2026; please see the [official pricing page](https://www.make.com/en/pricing) before deciding.

According to Make's official documentation, there are a few technical limits: each team can create a maximum of 100 scenarios per day, and each scenario has a size limit of 2 MB. For example, a test team running 3 scenarios in one day is still far from this limit. With the Free plan, you can have a maximum of 2 active scenarios at the same time. First, count how many scenarios you need to run simultaneously, then count credits per month, and finally compare with the $9 of the Core plan.

## How do I create my first scenario?

The first scenario should follow the official Make guide exactly (checked on 22/10/2026): monitor a spreadsheet, and when a new row appears, notify the person in charge. Six steps:

- **Step 1, create a Make account** (Free plan is enough to try).
- **Step 2, plan:** identify the source application (Google Sheets), the trigger event (new row), and the desired result (notification).
- **Step 3, create a new scenario** and add the first module to monitor the source data, then connect your Google account.
- **Step 4, add a processing module:** send a message to Slack or Telegram, combining fields from the spreadsheet into the message content.
- **Step 5, add a router and filter if needed,** for example, only notify when the row has a phone number.
- **Step 6, run a test,** check the result, then enable the scenario and set the run frequency.

With your website, replace the first step with a webhook: your website sends data right when a new form arrives, Make runs instantly instead of waiting to check the spreadsheet periodically. Details on the concepts in the posts [What is a Webhook?](/blog/webhook-la-gi) and [What is an API?](/blog/api-la-gi).

## How does a webhook in Make work?

A webhook in Make is a URL address that external services send data to in order to trigger a scenario immediately. According to Make's official documentation (checked on 22/10/2026), there are two types: webhooks from individual applications (instant trigger, labeled INSTANT) and custom webhooks that receive any data you send. If an application doesn't have a webhook, use a periodic check trigger (polling). There are four details that are often overlooked, according to Make:

- **1. Default parallel processing:** instant webhooks handle each request as it arrives. If you want to process in order, enable "Process data in order" in the scenario settings.
- **2. Default response:** when there is no Webhook response module, Make returns `200 Accepted` when receiving into the queue, `400 Queue is full` when the queue is full, and `429 Too many requests` when exceeding the rate limit.
- **3. Limited queue:** with each 10,000 credits allocated per month, each webhook can hold a maximum of 667 pending items, and a maximum of 10,000 items. When the queue is full, Make rejects new data.
- **4. Place the Webhook response module at the end.** If you place it in the middle of a scenario and a step after it fails, the scenario won't stop and you won't receive an error alert.

The opcaios.org website can send webhooks (with a signature) to Make's custom webhook address; verifying the signature requires adding a separate processing step.

## How do I handle errors in Make?

Make has its own error handling toolkit to keep scenarios running smoothly when a module breaks. According to the official documentation, it includes error handlers, exponential backoff retry mechanism, and an active error command (Throw). Practical approach: attach error handlers to modules that call external services, set retries for temporary errors like lost connections, and report to a chat channel when errors persist. Every workflow needs an "escape route" for errors, otherwise a broken step will cause the entire scenario to stop silently.

## How Make differs from Zapier and n8n

Make, Zapier, and n8n all connect applications, but they differ in intuitiveness, where they run, and how they charge. Choose Make if your process has many branches and conditions but you still want to use the cloud. Choose Zapier if you need the easiest option; see [What is Zapier?](/blog/zapier-la-gi). Choose n8n if you need data control or large volume; see [What is n8n?](/blog/n8n-la-gi). In a hypothetical situation, for example a process with three branches based on customer request type suits Make's router, while a simple task with two steps suits Zapier. Summary information for each tool is in the library: [Make](/tien-ich/make), [Zapier](/tien-ich/zapier), [n8n](/tien-ich/n8n). The table below compares four criteria: where it runs, interface, billing unit, and strengths.

### Comparison table for Make, Zapier, and n8n

| Criteria | Make | Zapier | n8n |
|---|---|---|---|
| Where it runs | Cloud | Cloud | Self-hosted or cloud |
| Interface | Visual canvas, branching with router | Sequential step list, Paths for branching | Node canvas, flexible, steeper learning curve |
| Billing unit | Credit (each action on most apps costs one credit) | Task (each successful action) | Self-hosted: server cost |
| Strengths | Multi-branch flows, complex data handling | Easiest to start, largest app library | Data control, code insertion, AI |

## Tips for using Make effectively and saving credits

A few habits help scenarios run smoothly and avoid wasting credits, based on common experience using Make:

- **Tip 1, filter early:** place a filter right after the first module so unnecessary data stops there, not passing through credit-expensive modules downstream.
- **Tip 2, name modules and add notes clearly,** so others can take over easily; Make supports notes for modules and routes.
- **Tip 3, always have a fallback branch** for data that doesn't match any condition.
- **Tip 4, test with sample data** step by step before enabling the schedule for all data.
- **Tip 5, use webhooks instantly instead of polling** when the service supports it, because polling checks periodically and wastes runs without new data.
- **Tip 6, estimate credits before enabling:** monthly runs times the number of modules that actually execute.
- **Tip 7, set up error alerts,** so you know right away when a scenario breaks instead of discovering it days later.

Read more: [5 best process automation tools 2026](/blog/cong-cu-tu-dong-hoa-quy-trinh-tot-nhat).

## Frequently asked questions

### What is Make.com and what is it used for?
Make is a no-code automation platform used to connect applications and services through diagrams called scenarios. Common examples: bring customers from a form into a spreadsheet and notify staff, sync orders, create scheduled reports.

### Is Make free?
Yes. According to the OPCAIOS Utilities library, summarized from Make's official pricing page, the Free plan includes 1,000 credits per month, maximum 2 active scenarios, and a minimum run interval of 15 minutes. Paid plans start at Core around $9 per month for 10,000 credits. Make's pricing page requires a bot check so OPCAIOS has not re-verified the price as of 22/10/2026. Example scenario: a 4-module scenario running for 250 customers per month uses around 1,000 credits, just hitting the Free plan limit. So check the official pricing page for current numbers before signing up.

### What is a credit in Make?
Credit is a billing unit, replacing the term "operation". For applications without AI, one module action costs one credit. Some AI and advanced features are charged by token, file size, number of pages, or processing time.

### Should I use Make or Zapier?
Choose Make if your process has many branches and conditions, and you want to see the entire flow on one canvas. Choose Zapier if you want the easiest approach with minimal setup. Try both with one real task, then compare the cost in credits and tasks.

### Where can I learn Make quickly?
Follow the "Create your first scenario" guide in Make's official help center (verified 22/10/2026), then try it with a small process of your own. For example, start by connecting a Google Sheets to Slack or Telegram, next add a filter to pass through only when there's a phone number, finally test with 5 sample rows and see how many credits you used. To build an automation process for a small business, see OPCAIOS's [AI application training course](/services/dao-tao-ung-dung-ai).

*Source: official [Make](https://help.make.com) help center (credits, webhooks, error handling, first scenario; verified 22/10/2026) and OPCAIOS Utilities library (plan pricing, number of apps). Make's pricing page blocks automated access so prices need to be confirmed again before signing up.*
